Jeep Liberty Renegade2003

CHRYSLER IS RECALLING 42,469 MY 2002-2003 JEEP LIBERTY VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN SALT BELT STATES OF CONNECTICUT, DELAWARE, IOWA, ILLINOIS, INDIANA, KENTUCKY, MASSACHUSETTS, MAINE, MARYLAND, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, VIRGINIA, WEST VIRGINIA , WISCONSIN AND THE DISTRICT OF COLUMBIA. THE FRONT SUSPENSION UPPER CONTROL ARM BALL JOINT MAY EXPERIENCE A LOSS OF LUBRICATION WHICH COULD LEAD TO CORROSION, ACCELERATED WEAR, AND POSSIBLE SEPARATION WHILE DRIVING.

FAILURE OF THE BALL JOINT COULD RESULT IN A LOSS OF STEERING CAPABILITY, INCREASING THE RISK OF A CRASH.

Timken is recalling certain non-formed, front wheel hubs, part number HA599467, which were sold to retail and automotive distributors in the automobile aftermarket as front wheel hub replacements designed only for use on certain 2002 through 2005, 4X4, non-ABS, Jeep Liberty vehicles. These front wheel hub units can be mistakenly sold to owners and installed on 4X2 versions of the Jeep vehicles.

If the non-formed hub unit is installed on a Jeep Liberty 4x2 model (which does not use an axle nut for hub retention), the vehicle wheel will not be secure and a front wheel separation may occur, increasing the risk of a crash.

Chrysler Group LLC (Chrysler) is recalling certain model year 1993-1998 Jeep Grand Cherokee and 2002-2007 Jeep Liberty vehicles. The fuel tanks in these vehicles are at risk of failure and leakage in certain rear impacts.

A fuel leak in the presence of an ignition source may result in a fire.

ON CERTAIN TRUCKS, THE CONSTANT TENSION FRONT LOWER BALL JOINTS MAY EXPERIENCE CONTAMINATION. IF THE VEHICLE IS OPERATED FOR AN EXTENDED PERIOD WITH THIS CONDITION, THE BALL JOINT MAY EVENTUALLY EXPERIENCE WEAR AND LOOSENESS.

WHEN THE DRIVER CONTINUES TO OPERATE THE VEHICLE WITH THIS CONDITION, THE CONTAMINATION CAN LEAD TO CORROSION, ACCELERATED WEAR AND POSSIBLY SEPARATION FROM THE STEERING KNUCKLE CAUSING A LOSS OF VEHICLE STEERING CONTROL INCREASING THE RISK OF A CRASH.

ROCK KRAWLER IS RECALLING 44 PERFORMANCE SUSPENSION SYSTEMS SOLD AS AFTERMARKET EQUIPMENT FOR USE ON THE VEHICLE LISTED ABOVE. THESE SUSPENSION SYSTEMS WERE PRODUCED WITH GRADE 2 CARRIAGE BOLTS INSTEAD OF THE PROPER GRADE 5 CARRIAGE BOLTS. THE IMPROPER GRADE 2 CARRIAGE BOLTS COULD EXPERIENCE A LOSS OF CLAMPING FORCE FOR THE BOTTOM STRUT FORK.

THIS CONDITION COULD CAUSE A LOSS OF EFFECTIVE LIFT AND LOWERING OF THE AFFECTED VEHICLE, POSSIBLY CREATING THE DRIVER TO PANIC WHICH COULD POSSIBLY LEAD TO A VEHICLE CRASH.

ON CERTAIN SPORT UTILITY VEHICLES, THE LOWER CONTROL ARM BALL JOINTS CAN EXPERIENCE A LOSS OF LUBRICATION THAT CAN LEAD TO CORROSION, ACCELERATED WEAR, AND POSSIBLE SEPARATION FROM THE STEERING KNUCKLE.

A BALL JOINT THATHAS SEPARATED FROM THE KNUCKLE COULD RESULT IN LOSS OF VEHICLE DIRECTIONAL CONTROL AND COULD RESULT IN A CRASH.